High Pressure Piston Grease Pump with Single Pumping Unit in Wind Mills

• After-sales Service: 24 Hours on Line
• Warranty: 2 Years
• Structure: Axial Plunger Pump
• Cylinder Number: Single Cylinder
• Drive Mode: Mechanically Driven Pump
• Pump Shaft Position: Horizontal
• Model NO.: ZJ-3608
• Type: Radial
• Power: Electric
• Straight Shaft Swashplate Piston Type: Pressureoil
• Radial Plunger Pump Type: Valve with Flow
• Oil Tank: 8L (8kgs)
• Material of Reservoir: PC
• Piston Mechanism: 2 Outlets
• Used Lubricants: Nlgi 2#, Nlgi 1# Nlgi0# Nlgi00# Nlgi000#
• Paddle Rotation: Counterclockwise
• Controller: Without Controller, Controller by External PLC
• Operating Voltage: DC24V/DC12V
• Operating Rotary Speed: 22rpm
• Operating Current: +20 Degree
• Idling Current: 0.8A/0.4A/0.1A
• Full -Load Current: 4.0A/2.0A/0.3A
• Fusing Current: 5A/3A/1A
• Rated Operating Pressure: 30MPa
• Protection Rate: IP65
• Transport Package: Packages
• Trademark: Herg
• Origin: China
• HS Code: 8413303000
• Production Capacity: 1000000

Product Description

ZJ series high pressure piston grease pump are able to accept up to two outlets working separately, and each outlet needs a piston mechanism. There are two models of piston mechanism: ZJ-3602-05 (fixed output) and ZJ-3602-05V (variable output). The system is capable of handling lubricants up to NLGI 2# grease. The system generally runs at high pressure, typically rated at 30Mpa. The ZJ series pump can be combined with U-shaped progressive distributors, SD type block-type progressive distributors to form progressive lubrication system.
Features of ZJ series high pressure piston grease pump:

1. 1. Electrically operated at DC12/24V, can be connected with the power of the main equipment, (e.g. engineering machinery, mobile machinery, etc.)
   2. Special alloy steel piston mechanism, with high accuracy, stable pressure, low noise and long usage life.
   3. With paddle, can release the air of the grease through the working of paddle.
   4. Can offer pressure signal with pressure switch installed on the lubrication system; can offer liquid level signal with liquid level switch, so it can realize long-distance monitor.
   5. In the aspect of controller, it can use the controller of the pump to monitor the time of operating and intermittent; it can also choose the PLC from main equipment to control the time of operating and intermittent.
   6. Two ways of grease pump control: one way is Time-Programme control (ZJ-3602-08-02A) and the other is Time-Travel control (ZJ-3602-08-02B) ( Further controller details in Page 14)

ZJ series high pressure piston pump are available in two types of reservoirs according to the material: PC type and metal type reservoir. For the capacity of PC reservoir, it is available with 2 liters,3 liters,4 liters,8 liters respectively; For the capacity of metal reservoir, it is available with 2 liters,4 liters.
 

1. Working principle

DC motor (10) continuously drives the eccentric mechanism (eccentric wheel <5> and shaft sleeve <6>). The piston of the eccentric mechanism (7) is pushed forward and backward to produce reciprocating movement to pump and deliver grease. And the integrated check valve (8) is to prevent any back flow from the main grease line. The paddle/ scraper (2) can press the grease from reservoir (1) along the grease baffler (4) into the suction section on the base of pump (3). The air bubbles are released out via the grease buffer, and ejected from the exhaust vent. The pressure of the safety valve (9) is preset at 30Mpa.

(1) 2-liter piston grease pump (PC material)

B. Piston grease pump with double piston mechanism
 

a. Without controller

Model: ZJ-3608/2 Technical Parameters: Reservoir Capacity: 3 L (2.5kg), 4L (4kg), 8L (8kg) Material of Reservoir: PC Piston mechanism (Outlet) : 2 sets Applicable lubricants: NLGI000# ~ 2 # grease and mineral oil: 40mm^2/s (cst) Paddle Rotation: counterclockwise Controller: Without controller, controlled by external PLC Motor: Operating voltage: DC12V/24V Operating rotary speed: 22rpm Operating Current: +20ºC, idling current:0.8A/0.4A                +20ºC,full-load current:4.0A/2.0A Fusing current: 5A/3A Rated operating pressure: 30 Mpa Protection Rate: IP55

 

b. With controller (time-programme controller or time-travel controller)

Model: ZJ-3628/2 Technical Parameters: Reservoir Capacity: 3 L (2.5kg), 4L (4kg), 8L (8kg) Material of Reservoir: PC Piston mechanism (Outlet) : 2 sets Applicable lubricants: NLGI000# ~ 2 # grease and mineral oil: 40mm^2/s (cst) Paddle Rotation: counterclockwise Controller: Controlled by external PLC Operating voltage: DC12V/24V Operating rotary speed: 22rpm Operating Current: +20ºC, idling current: 0.8A/0.4A                +20ºC,full-load current:4.0A/2.0A Fusing current: 5A/3A Rated operating pressure: 30 Mpa Protection Rate: IP55

Why choose us
We are speicallized in Herg mechanical centralized lubrication systems in China for many years. We adheres to the strategic policy of "Because professional , we'll make better". It produces a complete range of lubrication device series products with stable  quality,including resistance type, volumetric type, , spray type, progressive type and other oil and grease lubrication products. It is widely used in precision CNC equipment,plastic injection molding machines, printing, textile, elevator, mining, injection molding, die-casting, port, new energy, robot, construction machinery and other industries. We actively and independently develops and manufactures products that guide the development trend of the future lubrication industry. With Japanese - Cooperation experience and technology in the research and development, manufacturing and sales of  professional lubrication systems, We serves for the requirements from different customers, including making the OEM products and machining. Our products have been sold to USA, Japan, Turkey, Indonesia, Brazil, Mexico , India and other countries.