Chinese Monoblock Progressive Distributor Lubricating Distributor

• Customization: Available
• After-sales Service: 24 Hours on Line
• Warranty: 1 Year
• Model NO.: 6jasq/0.1/D66D
• Condition: New
• Certification: ISO9001
• Customized: Customized
• Material: Iron
• Application: Metal Recycling Machine, Metal Cutting Machine, Metal Straightening Machinery, Metal Spinning Machinery, Metal Processing Machinery Parts, Metal forging Machinery, Metal Engraving Machinery, Metal Drawing Machinery, Metal Coating Machinery, Metal Casting Machinery
• Transport Package: Cartons
• Specification: 57*27*38
• Trademark: Can OEM custom-made
• Origin: China
• HS Code: 84798960
• Production Capacity: 50000

Product Description

JASQ Series Dual-line Progressive Distributor 
I.Each group of pumping elements controls the two oil outlets alternately  and control the  grease discharge of displacement. Therefore, the blockage of one pumping elements will affect the oil outlets of the same group only , without influencing the other pump elements or the grease supply to other lubrication points. l
ii.Every two oil outlets shares one working indicator rod, facilitating the monitoring of the grease supply status of each lubrication point and maintenance. l

iii.The displacements of the oil outlets of the same distributor can be different (the two outlets of the same group of pumping elements have the same displacement); Different displacements can be selected according to the specific conditions of the equipment lubrication points. l

iv.Small displacement and high-frequency grease supply can be achieved. l

v.The grease outlet ports on both the left and right sides of the distributor and the grease inlet port have the same supply frequency.


Model No.:






Model example
8JASQ-0.1/0.15/0.2X2/D66D: 8-port JASQ series dual-line distributor; starting from the direction of the grease inlet, the discharge of the grease outlet is 0.1ml/cyc for two ports, 0.15ml/cyc for two ports, and 0.2ml/cyc for four ports; the diameter of the grease inlet connection pipe is 6mm; the diameter of the grease outlet connection pipe is 6mm and with a one-way valve.

Note:

1. Generally, the main cylinder of the concrete pump requires synchronous lubrication, and the single displacement needs to be larger than other lubrication points. Therefore, customers should pay attention when selecting the displacement; In the case of no indication, the two grease outlets on the left and the right sides close to the grease inlet side are used for the lubrication of the main cylinder;
2. When selecting an unilateral indicator rod, the grease outlet displacement on the rod side is slightly larger than that on the non-rod side. Due to the small difference, it can be ignored in working conditions where the requirements for the displacement are not too strict; the grease outlet displacements on both sides with rods are the same;

3.When the number of grease outlets is odd, two ports need to be combined.

Configuration and Installation Size

Outlets	6	8	10	12	14	16
L(mm)	63.5	81	98.5	116	133.5	151

Technical Database

Model	Discharge  capacity for each outlet	Norminal Pressure (MPa)	Starting Pressure	Connecting Pipe of outlet	Connecting Pipe of outlet
	ml/cy	MPa	MPa	mm	mm
JASQ	0.1;0.15;0.2	31.5	≤1.5	∅6  ∅8	∅6 ∅8